The Instruction Manual and Safety Instructions must be read and understood by anyone
operating the Vastex Conveyor Curing System.
•
The operator should read and understand the instruction manual before operating this equipment. Store instruc-
tion manual and safety instructions near equipment for easy access to operators.
•
VASTEX Conveyor Curing System is intended for the curing of non
-
flammable inks on screen printed materials.
Do not use for any other purpose unless authorized by Vastex International, Inc. Use of this equipment for any
other purpose can be dangerous and may cause damage to this equipment, voiding the warranty.
•
It is recommended that the area around this equipment be designated as a work area and only authorized em-
ployees be allowed in the area.
•
Children and pets must be kept clear of the work area.
•
Do not place any objects on top of the drying chamber. Surfaces are hot!
•
Never leave equipment unattended.
•
Do not operate conveyor or dryer with any cover or guard removed.
•
Operator must be familiar with controls of the dryer and conveyor.
•
Never put excessive load on the conveyor belt.
•
Before starting production, the operator must check that all covers and guards are in place, no material has been
left on the conveyor, and the work area is clear of obstructions.
•
Switch on and verify conveyor belt is moving before turning on the heat.
•
Allow dryer to cool to 300°F (149°C) before switching off conveyor.
•
Always turn off power at the main disconnect at the end of production.
•
In case an abnormal symptom occurs, for example excessive vibration, noise, and strong smell or smoke devel-
opment, turn off the VASTEX Conveyor Curing System and contact a qualified technician.
•
Immediately turn off the VASTEX Conveyor Curing System if products become jammed in the drying chamber or
conveyor belt.
•
Do not remove any cover or guard until power at the main disconnect is switched off and locked out. No unau-
thorized persons are to be allowed inside the control boxes.
•
Turn off and lock out power at the main disconnect before any cleaning or maintenance.
•
Only qualified technicians should be allowed to make repairs on the VASTEX Conveyor Curing System.
•
Noise and vibration:
This equipment does not produce noise exceeding 70 dB(A) at workstations.
•
CE Declaration of Conformity available upon request.
Introduction
Congratulations, you have chosen a VASTEX conveyor curing system. VASTEX has been designing and building
dryers since 1960 and has the knowledge and expertise to supply a quality dryer and help you keep it running for
years to come. VASTEX has innovated many of the features found in conveyor ovens today from control methods,
modular features, air movements and belt tracking.
Your Vastex Infrared Dryer has been Factory tested and burned in for a period of 2
-
8 hours. All components are
tested to be sure they work correctly when the Dryer leaves our factory.
Safety
Pg. 2