Operation Cont’d
Saving settings as a preset:
1) On the setup screen, select SAVE
PRESET.
2) Select a letter to save the preset to.
Settings currently stored to the letter
selected will be shown on the right.
Confirm all settings before overwriting
a preset.
3) To cancel saving a preset, press the X
in the upper right corner.
Load Preset Screen
Save Preset Screen
Preset slot
Return to setup screen
Settings currently
saved in selected
preset
Error messages:
EXPOSURE INCOMPLETE: POWER FAILURE
A power failure occurred during an exposure cycle. Loss of power to the unit or from
the power supply will trigger this error. If the error occurs during the exposing part of
the cycle, it is recommended to restart the exposure with a fresh screen.
Loading a saved preset:
1) From the home screen, choose
SELECT PRESET.
2) Select the desired preset.
Settings saved in the preset are
shown on the right side.
3) Select LOAD to load the desired
preset.
4) To return to the home screen, select
the X in the upper right corner.
Preset slot
Return to setup screen
Settings currently
saved in selected
preset
Pg.6
Summary of Contents for E2-CTS-2536
Page 12: ...Pg 12...
