Operation Cont’d
Touchscreen Controls
Set your exposure cycle by selecting either
ENTER TIME or SELECT PRESET on the home
screen. Your machine has the ability to save
and recall up to 10 presets, storing exposure
times.
Setting the exposure time:
1) From the setup screen press the number
under the label EXPOSURE .
2) Enter a time from 0-999 seconds.
3) Press DELETE enough times to enter the
desired time.
4) Press ENTER to confirm selection.
Running an exposure cycle:
1) From the setup screen, select RUN to start
the exposure cycle.
2) The remaining exposing time is shown on
the run screen.
To end the cycle at any time, select
CANCEL. Pressing CANCEL will return to
the setup screen.
3) After completing a cycle, EXPOSURE
COMPLETE will be displayed. Press OK to
return to the setup screen.
Home Screen
Setup Screen
Exposure Screen
Press to enter time
Return to home screen
Press to run
Press to save preset
Run Screen
Pg.5
Summary of Contents for E2-CTS-2536
Page 12: ...Pg 12...