6
Check that all accessories are complete and not damaged. Clean all detachable parts
thoroughly according to the section of
“CLEANING AND MAINTENANCE”
Important: Blades and chipping/slicing disk are very sharp, handle with care.
USING YOUR APPLIANCE
According to your desired task, select proper attachment for use: A: blending
attachment, B: chopping attachment , C: whisking attachment
.
A: Instruction for blending attachment
Important: Ensure that the stick blender is unplugged from the power outlet before
assembling or removing attachments.
Note
: The time running unit without load can’t exceed 15s. Max operation duration
under high speed per time less than
30s
. Minimum 3 minutes rest time shall be
maintained between two continuous cycles;
1. To use blending Jar
1. To assemble the detachable stem with the motor unit, turn the stem anti-clockwise
until tightened.
2. You shall peel or core the fruits and then cut them into small dices (approx. 15mm
x15mm x15mm), put the fruit dices or vegetable into the cup. Usually certain
amount of purified water has to be added to facilitate the smooth running, the
proportion of the food and water is 2:3. The amount of mixture should not exceed
the max capacity of jar.
3. Plug the appliance into power outlet.
4. Lower the hand blender into food and select proper speed button (low speed and
high speed) to press and hold it, the blender starts blending immediately. When
using the low speed button, you can adjust the speed adjusting dial on the top of
motor unit for different speed.
NOTE: the speed adjusting dial is not suitable for the high speed button.
5. Release the speed button to stop operating when the food consistency your
required is obtained.
B: Instruction for chopping attachment
The knife blade is mainly suitable for chopping carrots or meats.
1. Assemble the knife blade onto the shaft in the jar, always fit the knife blade before
adding ingredients.
2. Firstly cut the carrot into small pieces (15mm x 15mm x15mm), then place them
into the jar. Also you may chop cabbages, first cut the cabbage into small pieces so
that it can go through the feeding tube.
Note:
The max quantity of food can’t exceed the 200g for each operation.
Note:
Max operation duration at high speed per time shall not exceed 20s.
