14
5-
The P1 end time (default 22:00) flashes. You can change this time in increments of 30 min
with
or
.
Confirm by pressing
.
6-
Once you have finished programming the days, confirm by pressing
. You can scroll
through the days of the week in succession with the programmes that you have assigned to
them (AUTO, P1, P2, P3, CONF or ECO).
Checking the assigned programmes
- From Auto, Comfort, Eco or Frost protection mode, press
for 5 seconds. Press
again and you can see the programme for each day of the week.
- To exit the programme display, press
.
Temporary manual override of the current programme
This function allows you to change the setpoint temperature temporarily until the next
programmed temperature change or until the clock passes 00:00.
Example:
1-
The device is in Auto mode, the current
programme is Eco 15.5°C.
3
2-
By pressing
or
, you can temporarily
change the setpoint temperature to 18°C, for
example.
3
3
3
3
3
3
3
3
3
3
3-
This change will be cancelled automatically at
the next programme change or when the clock
passes 00:00.
3
NL
FR
DE
EN
IT
15
Important information
The presence/absence detector is sensitive to variations in temperature and light; it may be
impaired by the following:
- Sources of heat or cold such as forced air outlets, lamps, air-conditioning units.
- Reflective surfaces such as mirrors.
- An animal moving in the detection area.
- Objects being moved by the wind, such as curtains, net curtains or plants.
PRESENCE/ABSENCE DETECTION
Details
Your towel rail adapts to your lifestyle while controlling
your energy consumption.
Using its front infrared sensor, your towel rail optimises heat
management logically: it detects movement in the room
where it is installed and if no one is present it automatically
and gradually lowers the setpoint temperature step by step,
ensuring energy is saved. To ensure that it operates correctly,
take care not to block the field of vision of the detector in any
way (by curtains, furniture, etc.).
Lowering the temperature during unoccupied periods
Note:
If a presence is detected in the room, the device automatically returns to the initial mode.
Unoccupied periods *
Lowering the setpoint temperature *
20 minutes
Comfort -1 °C
40 minutes
Comfort -1,5 °C
1 hour
Comfort -2 °C
72 hours
Frost protection
60°
60°
Zone active
Zone inactive
View from above
Side view
20°
0°
* Factory settings – cannot be modified
Summary of Contents for KERMI Mabeo Aero MBA101200502XXK
Page 43: ...NOTES NOTES...
Page 44: ...9 0 D R 0 1 7 0 2 6 C D00020099 2019 07 6918289...
