Vasco KERMI Mabeo Aero MBA101200502XXK, Installation And User Manual

Page: 29 / 44

OPERATING MODES
2- Use a vacuum cleaner to remove the dust deposited on the filter. If the filter is very dirty,
wash it under the tap with a damp sponge.
After washing the filter, let it dry completely.
Note: you should clean the filter at least once a month if the word
FILE
is displayed on
the screen sooner than expected.
3- Replace the filter in its housing by inserting it into the slide rails.
• Auto mode
In Automatic Mode, the device will automatically
change from Comfort mode to Eco mode according
to the established programme.
3
MAINTAINING AND CLEANING THE FILTER
The blower is fitted with a detachable dust filter that
retains the impurities of the air in the room. If the filter
is clogged, the accumulation of dust can cause it to
stop working.
In Boost mode, the word
FILE
appears on the
display.
Before removing the filter, stop the device by pressing
the button (switch) located below the blower.
1- Pull the filter tab to the right or the left,
to one side, then pull it out of its housing.
NL
FR
DE
EN
IT
06 07
3 different cases depending on your set-up:
1
7 day and daily programme
Your device has been programmed and is executing Comfort and Eco mode orders in line
with the settings and time periods you have selected (see page 5 for more info).
In case of a power failure longer than 16h, the day and time will have to be reset, the weekly
program remains permanently in memory.
2
Programming by pilot wire (only for France)
3
Without programme
• Versions with presence/absence detector: the self-learning
automatic programming is activated as standard at the first
commissioning.
• Other versions: Comfort mode is permanently activated during
initial commissioning.
• Comfort mode
Non-stop Comfort mode. The device will operate
24 hours a day to achieve the temperature which
has been set (e.g. 19°C). The Comfort mode
temperature level can be set by the user.
• Eco mode
Eco, which means the Comfort Mode tempera-
ture minus 3.5°C. This enables you to lower the
temperature without having to reset the Comfort
Mode temperature.Select this mode for shortterm
absences (between 2 and 24h ) and during the
night.
• Frost protection mode
This mode enables you to protect your home
against the effects of cold weather (frozen pipes,
etc.), by maintaining a minimum temperature of
7°C in it at all times. Select this mode when you
will be away from your home for a long time (more
than 5 days).
You can access the Comfort temperature set up from
the Auto and Comfort Mode. It is preset to 19°C.
Using and you can adjust the temperature
from 7°C to 30°C by intervals of 0.5° C.
SETTING THE COMFORT TEMPERATUR
Use the button to select an operating mode that suits your needs
according to the season and when the building is occupied.
Select the required mode by pressing the button repeatedly.
Mode sequence diagram :
Auto Comfort Eco Frost protection