aXsGUARD Gatekeeper Installation Guide v2.7
aXsGUARD Gatekeeper Configuration
9.6.2
Setting up an Ethernet Internet Device
Caution
If your aXsGUARD Gatekeeper serves exclusively for authentication and not as a gateway
between your LAN and the Internet, the instructions in this section are not relevant to your
setup. If your aXsGUARD Gatekeeper acts as a gateway between your LAN and the Internet,
configuring the Internet device as instructed in this section is essential.
To set up the Ethernet Internet Device:
1.
Navigate to
Network
>
Devices
>
Eth
(see section
2.
Click on the Internet device,
eth1.
The screen below is displayed.
3.
Configure the fields as explained in the table below.
4.
Click on
Update
to finish.
©
August 2010 - VASCO Data Security
40
Image 36: Network > Devices > Eth >eth1
