Vasco E-Volve E-V, Manual Detailed Setting

Page: 30 / 52

ACCESS
You access the user settings in 3 steps. From Auto, Comfort, Eco or Frost protection mode:
WINDOW OPEN DETECTION
2- Press or .
On
= automatic mode activated.
OFF
= automatic mode deactivated.
3- Press to confirm and go on to the next setting.
To confirm and exit installer settings, press .
INSTALLER SETTINGS
5
06 INSTALLER SETTINGS
Details
Your heater is protected by a security code against any unauthorised
use.
The PIN (Personal Identity Number) code is a four-digit customisable
code which, once activated, prohibits access to the following
settings:
- Selection of Comfort mode: Access to Comfort mode prohibited,
only Auto, Eco and Frost protection modes are accessible.
- Changes to the minimum and maximum Comfort setpoint range
(changes to the Comfort temperature are therefore not possible
outside the authorised setting range).
- Programming changes.
Configuration of window-open detection:
- Setting the Eco REDUCTION level.
- Setting the Frost protection setpoint temperature
When using “PIN code locking” protection for the first time, you
must take the following 3 important steps:
1 - Initialise the PIN code, enter the default PIN code (0000) to
access the function.
2 - Activate the PIN code to lock the settings that will be protected
by the PIN code.
3 - Customise the PIN code; replace (0000) by your personal four
digit code.
PIN LOCK CODE
1- Press again to enter window open detection setting mode.
The window open automatic detection mode is activated by
default.
Setting sequence diagram:
Window open detection PIN lock code Default factory settings
INFORMATION
screens
1
INFORMATION
screens
1
Long press 5
seconds
1
2 short
presses
2
Long press
10 seconds
3 InSt
= installer settings