Vasco E-Volve E-V, Manual Detailed Setting

Page: 29 / 52

SETTING THE MAXIMUM AMBIENT
TEMPERATURE FOR STOPPING THE BOOST
AUTOMATICALLY
When the Boost is activated, the radiator must heat the room up to
a temperature limit: the max. ambient temperature. When this is
reached, the Boost stops automatically.
It is preset to 35°C. You can vary it between 25°C and 39°C in
increments of 1°C.
USER SETTINGS 05
The Boost light, the max. temperature and the keypad lock light
flash.
12- You can set the maximum temperature of the Boost by pressing
the or repeatedly in 1°C steps, up to 39°C.
13- To confirm and go on to the next setting automatically, press .
To confirm and exit user settings, press .
DEFAULT FACTORY SETTINGS
To reset the operating parameters, do the following:
1-
From the temperature unit setting, press .
rest
is
displayed for 1 second.
3- Press for 5 seconds. The device returns to its original
configuration and automatically goes back to Auto mode.
Operation
Comfort temperature setpoint 19°C
Duration of Boost 60 min.
Keypad lock Deactivated
User settings
Backlight L3
Eco REDUCTION level -3,5 °C
Frost protection setpoint temperature 7°C
Comfort low temperature limit 7°C
Comfort high temperature limit 30°C
Maximum duration of authorised Boost 60 min.
Maximum ambient temperature
for stopping the Boost automatically
35°C
Temperature unit °C
The following factory values will then be effective:
SELECTING THE TEMPERATURE UNIT
The default temperature unit is degrees Celsius.
14 - Press or to change the temperature unit.
15- To confirm and go on to the next setting automatically,
press .
2-
nO
flashes. Press or to select
Yes
.
yes
= Factory settings not reset
nO
= Reset the factory settings
5 sec.
Press 2x to confirm and exit user settings.
NL
FR
DE
EN
IT
PL