Vasco E-Volve E-V, Manual Detailed Setting

Page: 28 / 52

COMFORT SETPOINT TEMPERATURE LIMIT
You can limit the setpoint temperature setting range by inserting a
maximum and/or minimum stop preventing any change outside
this range(s).
• High temperature limit
Set a maximum stop preventing the setpoint temperature from going
above it.
The maximum stop is preset to 30°C. You can vary it between 19°C
and 30°C in increments of 1°C.
8- To change the maximum setpoint temperature, press or .
Press the button to confirm and go on to the next setting.
To confirm and exit user settings, press 2x .
• Low temperature limit
Set a minimum stop preventing the setpoint temperature from going
below it. The minimum stop is preset to 7°C. You can vary it bet-
ween 7°C and 15°C in increments of 1°C.
7- To change the minimum stop, press or then confirm by
pressing .
If you don’t want to change it, press : the device automatically
suggests the maximum stop setting. To confirm and exit user set-
tings, press 2x
.
04 USER SETTINGS
1 2
1 2
SETTING THE MAXIMUM DURATION OF THE
AUTHORISED BOOST
The maximum Boost duration is preset to 60 minutes. You can vary
it between 30 and 90 minutes in increments of 30 minutes.
9- The Boost light, the 60 minute preset duration and the keypad
lock light flash.
10- Press or to display the required duration.
11- To confirm and go on to the next setting automatically,
press .
To confirm and exit user settings, press 2x .
SETTING THE FROST PROTECTION TEMPERATURE
Your device is pre-set to 7°C, you can vary the value of the Frost
protection setpoint from 5°C to 15°C in increments of 0.5°C.
5- Press or to display the required value.
6- To confirm and go on to the next setting, press .
To confirm and exit user settings, press 2x .