Varytec Retro Blinder 80 LED, User Manual

Page: 21 / 40

DMX mode Highest possible start address
5-channel mode 508
8-channel mode 505
21-channel mode 492
This operating mode can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
n Press [MENU] repeatedly until the display shows ‘Mode’ . Confirm with [ENTER] .
Use [UP] or [DOWN] to select the menu item ‘Auto’ and confirm with [ENTER] to enable the
automatic mode.
n
To enable the automatic mode only for the COB LED, press [MENU] repeatedly until the
display shows ‘B light’ . Confirm with [ENTER] .
Use [UP] and [DOWN] to select the menu item ‘Auto’ and confirm with [ENTER] .
To disable the automatic mode only for the COB LED, use [UP] and [DOWN] to select the
menu item ‘Keep’ and confirm with [ENTER] .
n
To adjust the run speed of the automatic mode, press [MENU] repeatedly until the display
shows ‘Speed’ . Confirm with [ENTER] .
Use [UP] and [DOWN] to select the desired run speed ‘Slow’ or ‘Quick’ and confirm with
[ENTER] .
‘Automatic mode’
Operating
Retro Blinder 80 LED
21
Blinder