Varytec Giga Bar HEX 3, User Manual

Page: 41 / 64

6.
Confirm the selection with [SETUP] .
ð
The selected setting is accepted.
Use ‘SoUn’ to select 11 sound control programmes.
1.
Press [MODE] and use [UP] or [DOWN] to select the submenu ‘SoUn’ .
2. Confirm the selection with [SETUP] .
3.
Use [UP] or [DOWN] to select the desired sound control programme; display shows
‘So00…So10’ .
4.
Confirm the selection with [SETUP] .
ð
The selected setting is accepted.
Use ‘FLSH’ to select 15 strobe speeds.
1.
Press [MODE] and use [UP] or [DOWN] to select the submenu ‘FLSH’ .
2.
Confirm the selection with [SETUP] .
3.
Use [UP] or [DOWN] to select the desired strobe speed; display shows ‘FL01…FL15’ .
Sound control
Strobe speed
Operating
Giga Bar HEX 3Giga Bar HEX 3 BAT
41
LED bar