Varytec Giga Bar HEX 3, User Manual

Page: 42 / 64

4.
Confirm the selection with [SETUP] .
ð
The selected setting is accepted.
Use ‘SLAV’ to activate or deactivate the Slave mode.
1.
Press [MODE] and use [UP] or [DOWN] to select the submenu ‘SLAV’ .
2. Confirm the selection with [SETUP] .
3.
Use [UP] or [DOWN] to select the desired option; display shows ‘SL-N’ (on) or ‘SL-U’ (off).
4. Confirm the selection with [ENTER] .
ð
The device now operates in slave mode and applies all settings of the master device
or works in stand-alone mode again.
With ‘bAtt’ you can check the charge status of the battery.
1.
Press [MODE] and use [UP] or [DOWN] to select the submenu ‘bAtt’ .
2. Confirm the selection with [SETUP] .
ð
The current charge status of the battery is displayed.
Master / slave mode
Battery charge display (only
item no. 472655)
Operating
42
Giga Bar HEX 3Giga Bar HEX 3 BAT
LED bar