Varytec Giga Bar 5 LED RGBW 10x45, User Manual, Page: 38 / 72

To set one of the 51 preprogrammed colours ‘SELET COLOR’ , use [UP] and [DOWN] to select a
value between ‘001’ and ‘051’ . Confirm the selection with [ENTER] .
To adjust the stroboscope speed ‘STAT STROB’ , use [UP] and [DOWN] to select a value between
‘000’ (slow) and ‘031’ (fast). Confirm the selection with [ENTER] .
To return to the main menu, press [MENU] .
In the ‘MANUAL LEDs’ menu you can assign each LED a desired colour red, green, blue or
white.
Press
[ENTER] to open the main menu. Press [UP] and [DOWN] repeatedly until the display
shows ‘MANUAL LEDs’ . Confirm with [ENTER] .
Use [UP] and [DOWN] to select one of the twelve LEDs in the range between ‘LED1’ and
‘LED12’ . Confirm the selection with [ENTER] .
Use [UP] and [DOWN] to select the colours ‘red’ , ‘green’ , ‘blue’ or ‘white’ , that you want to
assign to the previously selected LED. Confirm the selection with [ENTER] .
To adjust the brightness of the adjusted colour, use [UP] and [DOWN] to select a value between
‘000’ (dark) and ‘255’ (bright). Confirm the selection with [ENTER] .
To return to the main menu, press [MENU] .
Manual colour setting
Operating
38
Giga Bar 5 LED RGBW 10x45°
LED bar