NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage,
never expose the device to any liquid or moisture. Avoid direct sunlight,
heavy dirt, and strong vibrations.
Only operate the device within the ambient conditions specified in the
chapter ‘Technical specifications’ of this user manual. Avoid heavy tem‐
perature fluctuations and do not switch the device on immediately after
it was exposed to temperature fluctuations (for example after transport
at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful
ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be
maintained by qualified service personnel at regular intervals to prevent
overheating and other malfunction.
The device must not be moved during use.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet)
matches the voltage rating of the device and that the AC outlet is pro‐
tected by a residual current circuit breaker. Failure to do so could result
in damage to the device and possibly injure the user.
Unplug the device before electrical storms occur and when it is unused
for long periods of time to reduce the risk of electric shock or fire.
NOTICE!
Risk of fire by exceeding the maximum current
The device can power further devices via a lockable Power Twist output
socket. The current consumption of all further devices connected in
series must not exceed the value stated in the technical specifications,
otherwise injuries and irreparable damage to the device can occur.
Only connect as many devices to the output socket that the maximum
current consumption is not exceeded.
Pay attention to the correct dimensioning (core cross-section) of the
power cables used for all devices connected in series.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your parquet, linoleum, laminate or PVC floor
and after some time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use
felt-pad floor protectors or a carpet.
Safety instructions
Hero Spot 230
9
moving head
