Varytec 477539, User Manual

Page: 22 / 40

3.
Use [UP] or [DOWN] to select the desired parameter.
The following sub menus are available:
Menu level 2 Menu level 3/4 Description
‘Pan Reverse’ Pan inversion
‘YES’ reversed direction of rotation
‘NO’ normal direction of rotation
‘Tilt Reverse’ Tilt inversion
‘YES’ reversed direction of inclination
‘NO’ normal direction of inclination
‘Pan Limit’ ‘Starting point’
‘0’
… ‘539’
Starting point of the rotation angle
‘Ending point’
‘1’
… ‘540’
Ending point of the rotation angle
‘Tilt Limit’ ‘Starting point’
‘0’
… ‘259’
Starting point of the inclination angle
‘Ending point’
‘1’
… ‘260’
Ending point of the inclination angle
‘Home Position’ Setting the start parameters
Detailed information about this menu item can be found
under
Ä
‘Setting the start parameters’ on page 24 .
‘DMX Fail’ Behaviour on DMX control failure
‘Hold’ last DMX signal is being held
‘Blackout’ Blackout on DMX failure
‘Auto Mode’ Automatic programmes mode on
DMX failure
‘Manual Control’ Manual mode on DMX failure
‘Sound Mode’ Sound control on DMX failure
‘Dimmer Curve’ Dimmer curves
‘Linear’ linear proportional course
‘Exponential’ square curve with a flat course at the
beginning and steep course at the
end
‘Logarithmic’ Inverted square curve with a steep
course at the beginning and a flat
course at the end
‘S Curve’ Non-linear curve with a distinctive
flat course at the beginning and end
Operating
22
Hero Spot 230
moving head