VT150 DiamondVue Series User Guide 150-005
GETTING STARTED
GETTING STARTED
3
Section
3.1
Adjusting the display
The VT150 DiamondVue Series display has an embedded microprocessor in the converter
card. Once you have the unit displaying the resolution you desire for your application do the
following:
In order to navigate to the appropriate adjustments, press
Menu
(or
MODE
)
and the OSD
layout chart will appear as indicated as shown below.
There are four membrane buttons located on the unit. They will activate the OSD and allow
navigation to all adjustments if your unit requires adjustment.
Press
MENU
(or
MODE
) and a major adjustment category will appear. Press
DOWN
or
UP
and you will see the remaining adjustment categories. Press SEL to select a category or item
for adjustment. The actual adjustment categories are listed under each major category (
bold
)
as shown below.
7
Definition of OSD (on screen display) Adjustments
3.2
MODE
CATEGORY
DESCRIPTION
PICTURE
Brightness, Contrast, Clock, Phase, H Position, V Position
ADVANCED
Color temp, User red, User green, User blue, Gamma
OPTION
OSD, OSD H pos, OSD V pos, Backlight
UTILITY
OSD Timeout, OSD background, auto adjust, factory reset,
power on time, backlight on time
PICTURE
Brightness, Contrast, Color, Tint, Sharpness
VIDEO
Video format, Video type
