8.4’ DiamondVue User Guide 150.028
2.6
Signal Connections Cont.
You can use an HD-15 connector cable or a BNC adapter cable to connect the flat panel
monitor to the host computer. The HD-15 video cable (supplied in the kit) you use with this
monitor is equipped with a conventional HD-15 connector at each end.
Note:
The following figure is the view looking into the pin end of the male connector or solder
term end of the female connector.
HD-15 Video Connector
The following table provides the pin numbers and corresponding pin
assignments for the HD-15 video connector.
5
Pin assignments for the HD15 video connector
Pin
Connection
Pin
Connection
1 Red
Video
9 No
Connection
2 Green
Video
10
Sync
Ground
3
Blue Video
11
No Connection
4 No
Connection
12
Bi-Directional
Data
5 Return
13
Horizontal
Sync
6
Red Video Ground
14
Vertical Sync
7
Green Video Ground
15
DDC Clock
8 Blue
Video
Ground
Pin assignment for 9 Pin Optional Touch Screen Connector.
Pin
1 DCD Data
Carrier
Detect
2
RD (Rx)
Receive Data
3
SD (Tx)
Transmit Data
4 DTR Data
Terminal
Ready
5 SB
Signal
Ground
6 DSR
Data
Set
Ready
7
RTS
Request to Send
8
CTS
Clear to Send
9 NC
No
Connection
HD15 Connector
