8.4’ DiamondVue User Guide 150.028
10
Adjustment Procedure Cont.
3.3
OSD Display Menu
Advanced
The advanced control allows for several advanced adjustments.
Factory Preset
Sharpness
OSD Horz. Pos
OSD Vert. Pos
Factory
Preset
The Vartech display has a number of standard settings installed at the factory for your
convenience. If you make a number of adjustments and then want to default to the
standard settings, proceed as follows.
Press
Menu
.
Press the
Up
button to the ninth icon which is
Advanced.
Hit
Select
and then press the
Up/Down
button to select
Factory Preset
.
Hit
Select
again and the display will default to all original factory adjustments.
When complete press
Select
and you are ready to move to the next adjustment.
Sharpness
Press
Menu
.
Press the
Up
button to the eight icon which is
Advanced.
Hit
Select
and then press the
Up/Down
button to select
Sharpness
.
Hit
Select
again and adjust the sharpness value which is graphically illustrated along
with a digital value.
When complete press
Select
and you are ready to move to the next adjustment.
If you desire to adjust the OSD display off center to another location, proceed to
adjust the
horizontal and vertical position as outlined
OSD Horz.
Pos.
Press
Menu
.
Press the
Up
button to the ninth icon which is
Advanced.
Hit
Select
and then press the
Up/Down
button to select
OSD Horz. Pos
.
Hit
Select
again and adjust the horizontal position of the OSD to your desired location.
When complete press
Select
and you are ready to move to the next adjustment.
OSD Vert.
Pos.
Press
Menu
.
Press the
Up
button to the ninth icon which is
Advanced.
Hit
Select
and then press the
Up/Down
button to select
OSD Vert Pos
.
Hit
Select
again and adjust the vertical position of the OSD to your desired location.
When complete press
Select
and you are ready to move to the next adjustment.
Cancel
This control allows the cancellation of any values previously entered.
Press
Menu
.
Press the
Up
button to
Cancel.
Hit
Select
and all entries will be canceled.
