5
www.varta-electronics.ru
Installation/Connection
a – Trim frame
b – Frame uninstall direction
c – Release key insertion
1. Switch off the unit and detach the front
panel.
2. Insert your fingers into the groove in the
front side of the trim frame (apply some ef-
fort to detach the frame). Pull the frame to
detach it.
3. Insert the supplied release keys into the
both sides of the unit body to click, as shown in
the picture. To extract the unit from the dash-
board, pull the release keys or the unit body to
pull it out. Before detaching the unit, ensure it
is not fixed with the metal strap.
Trim frame installation
To install the trim frame, press it to the unit
body and push it to fix it in place. This should
be done before installing the front panel;
otherwise you are not able to install the trim
frame. When the trim frame being installed,
the side with the groove should face down
and fixed first.
2. DIn rear-mount (Method B)
For this method, use the screw holes in the
lateral sides of the unit. Fix the unit with the
help of the factory radio mounting brackets.
2
2
5
5
4
3
1. Select a position in which the screw holes
of the brackets (3) are aligned with the screw
holes in the unit body, and screw in two screws
(2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
The outer trim frame and mounting
sleeve are not used for method of installa-
tion.
Detachable control panel
Insert the left locker of the body into the
fixing hole on the left side of the panel, then
insert the right locker into the right hole of the
panel. Press on the upper part of the panel
until a click.
To detach the front panel, press OPEN but-
ton. Push the panel to the right to detach the
left locker. Then detach the right locker.
The control panel can easily be damaged
by shocks. After removing it, place it in a pro-
tective case and be careful not to drop it or
subject it to strong shocks. The rear connec-
tor that connects the main unit and the con-
trol panel is an extremely important part. Be
careful not to damage it by pressing on it with
fingernails, pens, screwdrivers, etc.
If the control panel is dirty, wi pe off the
dirt with soft, dry cloth only. And use a cotton
swab soaked in isopropyl alcohol to clean the
socket on the back of the control panel.
anti-theft system
The front panel of this unit can be stored in
the included protective case when not in used
and carried away when you leave the vehicle
to deter theft.
Switch off the power of the unit. Detach
the front panel, then put it to the protective
case and take it with you.
