10
Operation
www.varta-electronics.ru
GEnERal OPERaTIOns
Resetting the unit
Operating the unit for the first time or af-
ter replacing the car battery, you must reset
the unit.
Press OPEN button on the panel to open
the panel and press RESET button to restore
the unit to its original factory settings.
Power on/off
Press any button (except OPEN) to turn on
the unit. Press and hold PWR button to switch
the unit off.
After the unit is off, the volume level
and radio current settings will be memorized,
and when you turn the unit on it will resume
the stored status you previously set.
Volume control
Rotate VOL knob on the panel or press
V+/V- buttons on the RC to adjust the volume
level.
setting the sound parameters
Press repeatedly VOL knob on the panel
or SEL button on the RC to select an audio
setting: VOL (volume) => BAS (bass) => TRE
(treble) => BAL (balance) => FAD (fader).
Rotate VOL knob on the panel or press V+/-
buttons on the RC to adjust each setting.
• If the unit is turned off, all the set
-
tings of each mode will be saved.
• If cutting off battery power or resetting
the unit, all the settings will return to factory
default settings.
• When DSP is set to any mode, Balance
and Treble are not adjustable.
• If you don’t adjust the setting within
several seconds after selecting the desired
setting, the unit will automatically return to the
current mode being displayed.
setting other features
Press and hold VOL knob on the panel or
SEL button on the RC, and then shortly press
this knob/button repeatedly to select a setting.
Rotate VOL knob on the panel or press V+/-
buttons on the RC to adjust each setting.
INVOL: Set default volume level when the
unit is turned on.
CLOCK: you can set the clock. Rotate VOL
knob clockwise to set minutes; rotate VOL
knob counterclockwise to set hours.
24 HOUR: choose 24 hour clock display
mode or 12 hour clock display mode.
LOUD ON/OFF: Enable LOUD ON (Default
is LOUD OFF).
BEEP ON/OFF: if BEEP on, pressing any key
will make a beep sound.
DSP: Choose intended sound effect in the
sequence: POP => ROCK => CLASS => FLAT
=> NONE.
sound mute
Press MUTE button to turn the sound off.
Press it again or rotate VOL knob on the pan-
el or press V+/- buttons on the RC to resume
sound.
Mode select
Press MODE button repeatedly to select:
TUNER => CD => SD => USB => AUX.
CD, SD and USB modes are only avail-
able if corresponding media device is in the
unit.
Display
Press DIS button repeatedly to see cur-
rent tuning information and time. Sequence
of the menu: Clock => PTY => PS => Radio
frequency.
aUX in jack
AUX-in jack is intended for connecting an
external audio or video equi pment to amplify
the sound. If connection is made correctly, the
audio signal from the external source will be
translated through the acoustics of the head
unit. This enables to adjust the volume and
quality of the sounding. For example, you can
connect an MP3-player to listen to tracks us-
ing the car acoustic system.
