POWX1310
EN
Copyright © 2021 VARO
P a g e
|
8
www.varo.com
Move the motor base backward and switch the machine off.
9.7
Joining the workpieces
When the grooves in both work pieces have been made the workplaces can be joined together
Put glue in both grooves.
Race the biscuit dowel in the groove of one work piece.
Place the other work piece on the biscuit dowel.
Fasten the work pieces and wait till the glue is dry.
10 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
10.1
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11 TECHNICAL DATA
Voltage
230V
Frequency
50Hz
Power input
900W
No-load Speed
10 800 min
-1
Disc diameter
100mm
Blade bore diameter
22 mm
Max.cutting depth
19mm
Fence adjustment
0°-90° / 90°-135°
Spindle dimension
M10
Weight
3.0kg
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
89 dB(A)
Acoustic power level LwA
100 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration)
5,1 m/s²
K = 1.5 m/s²
