POWXG2016
EN
Copyright © 2015 VARO
P a g e
|
11
www.varo.com
Extract fuel from the tank and run the engine until it stops naturally.
Remove the sparking plug and put in 1-2cc of 2- stroke oil in the engine. Pull the starter
rope 2-3 times, set the plug back, and stop it at the contraction position.
Apply anti-rust oil to the metal parts such as the throttle wire, etc., put the cover on the blade,
and keep it indoors to avoid exposing it to dampness.
10 CLEANING
Use a damp cloth to clean the plastic parts.
Do not use any detergents, solvents or pointed objects.
11 STORAGE
So that the hedge trimmer will work again after a long period of inactivity, you should
observe the following points:
Empty the petrol tank. To do this, start the engine and let it run until it reaches a standstill.
Dispose of the remaining petrol in an environmentally friendly way.
Let the engine cool and take out the sparking plug.
Pour a small spoonful of 2-stroke mixture into the sparking plug opening and slowly pull
the starter cord right through to the end several times. This gets rid of small deposits of
rust and lubricates the piston and cylinder.
Check the sparking plug and replace it if too much of the firing tip has been burnt off.
Keep the blade in a dry place
– out of the reach of fire.
12 STARTING UP AFTER LONGER PERIODS OF INACTIVITY
Remove the sparking plug.
Quickly pull the starter cord right through several times in order to remove oil and deposits
in the engine compartment.
Check the sparking plug, replace it if necessary and screw it in.
Fill the petrol tank with the 2-stroke mixture.
13 TECHNICAL DATA
displacement
26cc
Construction
Hand-held
Weight
5,6 kg
Fuel tank capacity
500ml
Blade length
600mm
Blade speed
2300r/min
Max. engine speed
7000r/min
Engine idle speed
3100r/min
Clutch engagement speed
4500r/min
Output power
750W
Engine oil / gasoline mixed ratio
1:40
