LED DIMMER 1-10V 800W WITH REMOTE
VARNALUX.COM
ENGLISH
LED DIMMER
1-10V 800W WITH REMOTE
GENERAL INFORMATION
ETH-8008 is a standard intelligent dimmer 0 / 1-10V for
adjusting the brightness of LED lighting - manually - with
buttons or with infrared wireless remote. It is suitable
for adjusting the LED driver with dimming, as well as the
electronic rectifier, with 0 / 1-10V option for adjusting the
brightness of the LED lamp, fluorescent lamp, etc. It has
a gray spectrum level - 256, with delayed shutdown (1 to
4 hours), brightness key and fixed functions for displaying
the gray range.
INSTALLATION AND OPERATION
1) The input voltage of this controller should be AC90
-240V.
2) Never connect two wires directly to avoid a short
circuit.
3) Knob operation: rotate the knob clockwise to increase
the brightness. Rotating the knob counter-clockwise will
decrease the brightness.
4) Remote control operation: make sure the remote
control is facing the infrared receiver and that there are
no obstacles between them. When the dimmer receives a
signal from the remote, the indicator light flashes.
Notice:
Please, DO NOT TOUCH the motherboard while the
dimmer is connecting to AC power. Setup according the
technical guide.
The warranty for this product is one year and it does not
cover cases of improper use or failures in the electrical
network.
3
