10
kodiak
User
-
friendliness
:
KODIAK has been designed in partnership with kitchen and bakery staff, which has resulted in a number of user benefits:
The machine itself:
Can be connected to the mains by the user (100V-240V)
Is made of stainless steel
The floor model has height-adjustable feet to ensure that the high bowl trolley works properly
Is easy to clean, with large surfaces and a removable bowl screen which can be machine-washed
The power cord is connected to a waterproof silicone plug and can not be shaken from the machine (100V-240V)
The inclined control panel combined with the large bowl diameter provides a good view of the contents of the bowl.
The machine is equipped with a spring that helps to lift and lower the bowl
Control panel:
The control panel is simple and intuitive, with large push buttons.
The speed can be increased/decreased continuously by holding down
and
. It is also possible to ‘step’ between the
predefined speeds
The panel is inclined at the ergonomically correct height, making it very comfortable to use.
The panel is easy to clean with a damp cloth.
There is a built-in timer function with a display, which can also be used to show the
number of operating hours.
Bowl screen:
The one-piece bowl screen is made of transparent plastic. The screen is easy to
remove and clean. The screen can be machine-washed at up to 140
o
F and can
withstand up to 194
o
F for short periods.
The loose silicone filling chute withstands being exposed to hot ingredients up to
392
o
F, and is dishwasher-safe
The screen is made of a special impact-resistant material which can withstand daily
use in a commercial kitchen.
The bowl screen is held in place by magnets, so there are no loose parts that can
break or collect dirt.
It is not possible to attach the screen incorrectly.
A force corresponding to 6.6 lbs or 30 N should be used to remove the screen.
The filling hole in the bowl screen can be turned to suit the user’s needs.
Bowl and bowl trolley (bowl trolley only floor model):
The bowl is not very deep but has a large diameter, which makes it easier to see the
contents while working.
The bowl does not have to be lifted into place in the bowl arms, but can be wheeled
directly into position.
The bowl trolley is used for transfer from mixer to workbench, dishwasher, stores etc.
The bowl trolley provides an ergonomically correct working height.
The bowl trolley spares the user any heavy lifting.
The bowl can be tilted in the rubber ring on the bowl trolley.
Tools:
The machine whip is very compact in design, which provides for a long service life. It must be handled according to these instructions.
The bowl, beater, hook and whip are made of stainless steel.
