Varimixer Flexlift, Operating Instructions And Spare Parts

Page: 7 / 55

Page 7
8. Resolving faults
Fault type Check the following Solve
The timing belt jumps on
the belt wheel (the belt is
making crackling noises)
Is the belt slack? Tighten the belt using the screws at the
top of the mast.
Is the belt worn? Replace the belt
The belt is skewed (the belt
squeaks)
Is the belt running skewed in
the track on the top cog wheel?
Adjust the screw at the top of the mast,
on the side to which the belt is skewed.
Is the belt worn? Replace the belt
The sledge jerks Is there dirt in the mast on
which the sledge runs?
Remove the dirt and wipe with alcohol.
Is there dirt on the sledge
wheels?
Remove the dirt or replace the wheels.
The lifter does not respond Check whether the item being
lifted is heavier than the lift's
capacity
Remove the item
Check the main fuse Replace the main fuse
Check that the batteries are
charged
Connect the charger
The lift works very slowly Check the voltage of the
batteries
Connect the charger
Check the charging frequency.
Does the light quickly change to
green when connected?
If the charger quickly changes to green,
indicates that the batteries should be
replaced or the fuse on the charger is
broken