Varimixer Flexlift, Operating Instructions And Spare Parts

Page: 4 / 55

Page 4
1. Specifications:
M H
Weight (kg) Flexlift 75 79
Maxilift 100 75 75
Maxilift 140 79 79
Megalift 135 142
Max. load (kg) Flexlift 80
Maxilift 100 110
Maxilift 140 140
Megalift 200
Cladding class Flexlift IP66
Maxilift 100 IP66
Maxilift 140 IP66
Megalift IP65
Batteries 24V, 18 Ah
Charger: Flex-/Maxilift 230V – 2 Amps
Maxilift 230V – 3 Amps
Charging time 8 hours (100%)
Sound pressure level ≤ 70 Db(A)
Vibration strength ≤ 2.5 m/s 2
For additional technical specifications and dimensions please refer to the attached dimensional drawings.
2. General safety precautions during use
The following guidelines must be followed when using a Lift:
o
Under no circumstances should the lift elevate more than specified on the label.
o
The lift must not be used for lifting persons or live animals.
o
Only one person must operate the lift at the time.
o
No body parts near the sledge or tool at the mast or other lifting equipment when operated
up/down.
o
Secure that there are no one below the load, tool and lift when operated.
o
Only use the lift when operated on a hard leveled surface during lifting or transporting loads.
o
When transporting a cargo the load should be lowered to the lowest possible position and secured
in order ensure that the cargo cannot slide.
o
Always secure the cargo on the lift when moving.
o
When leaving or storing the lift, always ensure that the sledge is lowered to the lowest possible
position and that the lift is free of any items or cargo.
o
The load's center of gravity should always be behind the front wheels of the legs.
o
According to the Danish Working Environment Service, the lift must be inspected at least once a
year by the manufacturer or a skilled technician.
2.1. Safety systems
The lifter is equipped with the following safety systems:
o
One-way ball bearings on drive shaft that eliminate the risk of crushing when lowering.
o
Overload sensor that disconnects the lifting function if the load is greater than the lifter's capacity
or if the load is unevenly placed (this does not prevent overloading when the lifter is not lifting).
3. Application
The lifter may only be used for lifting and handling goods.