2
General:
This manual should be seen as an integral part of the machine and should be kept by the machine throughout its
working life.
Before the machine is commissioned, it is important to read these instructions thoroughly, particularly the section on
user safety.
The manufacturer may update the product manual without updating this copy of the manual.
The manufacturer will not be liable for faults caused by:
• Careless, improper or incorrect use of the machine
• Non-standard use (not for the purposes described in the manual)
• Incorrect installation
• Incorrect power supply to the machine
• Failure to comply with maintenance instructions
• Modifications to the machine
• Spare parts and accessories that are not original or specified for this model
• Failure to comply with instructions in this manual
In case of faults with the machine, please contact the supplier.
The guarantee does not cover damage caused by misuse, overloading or the user’s failure to comply with the main-
tenance instructions.
Unpacking:
The machine should be unpacked and the packaging disposed of accord-
ing to regulations applicable in the country concerned.
Before the machine is removed from the pallet, check that all parts are
present with the machine:
• Safety guard, Filling chute, Bowl.
• Grease gun and Rubber feet, Spacers for height adjustment
• Bowl trolley, whip, beater, hook and scraper with blade, attachment drive,
if these were selected with the order.
The machine is attached to the pallet with four bolts, to release the machine
from the pallet, unscrew the 4 nuts with the supplied tool and hammer
out the bolts.
Contents:
General ............................................................................................................................................2
Unpacking........................................................................................................................................2
Safety ..............................................................................................................................................3
Installation of the mixer....................................................................................................................3
Cleaning ..........................................................................................................................................4
Working with hot ingredients ...........................................................................................................5
The maximum capacity of the mixer ................................................................................................5
Operation of the mixer .....................................................................................................................6
Recommended maximum speeds ...................................................................................................7
Construction of the mixer.................................................................................................................8
Maintenance and lubrication............................................................................................................8
Adjustment of special v-belt.............................................................................................................9
Adjustment of speed ........................................................................................................................9
Adjustment of bowl fixing
...............................................................................................................10
Adjustment of bowl centering ........................................................................................................10
Adjustment of bowl height .............................................................................................................10
List of errors and possible solutions .............................................................................................. 11
Error codes .................................................................................................................................... 11
Principle electrical diagram............................................................................................................12
Contents of the Declaration of conformity for machinery...............................................................14
