2
VL1600 PROFILE
QUICK START GUIDE
443581625410 REV 00 10/21
To connect power and data:
Step 1.
Connect data cable from console to fi rst luminaire in chain at DATA IN connector.
Step 2.
If required, connect additional data cables from DATA THRU connectors to DATA IN connectors
of remaining luminaires in link.
Step 3. At last luminaire in link, install male termination connector at DATA THRU connector.
(Luminaires and other devices on the same DMX chain may not function properly without
termination.)
Step 4. Connect AC Input Cable connector to power input source.
Step 5.
Dress AC input and data cables and secure them so that they will not interfere with luminaire
head and yoke movement.
FLOOR MOUNTING
All luminaires included in this manual are designed to sit directly on its base in a fl oor installation
application. When used in this type of application, be sure to leave enough space around the luminaire
to allow proper, uninterrupted airfl ow for cooling and movement.
HANGING THE FIXTURE
The VL1600 Profi le can be hung horizontally or vertically from any structure designed to work with the
type of load created by this moving luminaire. Two mounting truss hooks or other mounting hardware
are required. Many compatible truss hooks are available from diff erent manufacturers for your particular
needs.
A minimum of two hooks per luminaire is required. If mounting method does not use truss hooks, two
attachment points, per luminaire, are required.
VL1600 Profile Channel Requirements*
DMX512
Channels
16-Bit Enhanced Mode (default)
16
**DMX terminator required for last fixture on DMX line.
Data In
Data Thru
Data Thru
Termination**
Menu Display
45 Channels
Description
