background image

Page 18

© 2013 Cascade Designs, Inc.

Installation Instructions

LIMITED WARRANTY/LIMITATIONS OF REMEDIES AND LIABILITY

U.S.A. and Canada

Limited Warranty.  VARILITE, a division of Cascade Designs, Inc., to the original owner (“Owner”), 

under intended use and maintenance, warrants the enclosed product (“Product”) to be free from 
defects in materials and workmanship for two years from date of purchase of the Product.  
No 
warranty against defects in materials and workmanship will apply if Product is: (i) altered in any way, 
except as specifically provided for in product instructions; (ii) used for purposes inconsistent with 
Product’s intended purpose or design; or (iii) improperly maintained.  Warranty will furthermore be 
voided where user: (i) failed to follow Product instructions or warnings; or (ii) subjected Product to 
misuse, abuse, or neglect.
During the warranty period, original Product parts determined by 

VARILITE

 to be defective in 

materials or workmanship will be repaired or replaced as Owner’s sole remedy.  

VARILITE

 reserves 

the right to replace any discontinued product with a new product of comparable value and function.  
A returned product deemed irreparable becomes the property of 

VARILITE

, and will not be returned.

EXCLUDING THE LIMITED WARRANTY PROVIDED ABOVE, 

VARILITE

, ITS 

AFFILIATES AND THEIR SUPPLIERS, TO THE MAXIMUM EXTENT PERMITTED BY LAW, MAKE 
NO WARRANTIES, EXPRESSED OR IMPLIED, AND DISCLAIM ALL WARRANTIES, DUTIES AND 
CONDITIONS, WHETHER EXPRESSED, IMPLIED, OR STATUTORY, WITH RESPECT TO THE PRODUCT, 
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, AGAINST 
LATENT DEFECTS, FITNESS FOR A PARTICULAR PURPOSE, OR CORRESPONDENCE TO
DESCRIPTION.
Warranty Service To obtain service under this warranty, the warranty-eligible 
Product must be presented to a 

VARILITE

 authorized dealer.  In the United States and Canada, 

warranty service may also be obtained by calling (800) 827-4548, Monday through Friday 7:00 AM to 
4:30 PM Pacific Standard Time.  Owner is responsible for all costs associated with returning Product 
to 

VARILITE

 for service.  Where at its sole discretion 

VARILITE

 deems Product eligible for warranty 

repair or replacement, 

VARILITE

 will pay the shipping and handling associated with returning 

repaired or replaced Product to Owner.  In instances where 

VARILITE

 deems a returned product 

ineligible for warranty service, 

VARILITE

 will, if possible, repair product for a reasonable charge that 

includes return shipping and handling.  
Limitation of Remedies Should a court of competent jurisdiction find the limited warranty set forth 
above breached, 

VARILITE

’s only obligation will be to, at its option, either repair or replace Product.  

Should the aforementioned remedy fail of its essential purpose, 

VARILITE

 will, in exchange for return 

of Product, refund to Owner Product’s original purchase price.  THE FOREGOING REMEDY IS THE 
SOLE AND EXCLUSIVE REMEDY OF THE PURCHASER AGAINST 

VARILITE

, ITS AFFILIATES AND THEIR 

SUPPLIERS, REGARDLESS OF LEGAL THEORY.
Limitation of Liability  

VARILITE

’s, its affiliates’ and their suppliers’ maximum liability is limited 

to incidental damages not to exceed the original purchase price of the Product.  

VARILITE

, ITS 

AFFILIATES AND THEIR SUPPLIERS HEREBY DISCLAIM AND EXCLUDE ANY LIABILITY FOR ANY 
CONSEQUENTIAL OR OTHER DAMAGES RESULTING FROM ANY REASON WHATSOEVER.  THIS 
EXCLUSION AND LIMITATION APPLIES TO ALL LEGAL THEORIES UNDER WHICH DAMAGES MAY BE 
SOUGHT, AND WILL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.
This limited warranty gives you specific legal rights; you may have additional rights which vary state 
to state.
Always completely follow: safety, use, operation, and maintenance instructions for this or any other 

VARILITE

 product.

European Union customer statutory rights are not affected.

Warranty

Summary of Contents for JUNIOR





















Reviews: