Page 11
© 2013 Cascade Designs, Inc.
Installation Instructions
Adjustment may be necessary to complete the installation and accommodate the
width of the wheelchair, or for desired seat depth, angle and height.
The following steps must be done before the client is in the wheelchair:
1. Determine the optimal height of the back on the wheelchair.
2. Attach Cane Brackets to each wheelchair cane, ensuring that the Holsters face
each other and the Slide Caps open rearward.
3. Align the two Cane Brackets so they are parallel and level with each other.
Tighten Cane Bracket screws enough to hold the Cane Brackets lightly in place.
4. Loosen the Slide Bracket screws.
5. Insert the back so that the Slide Brackets fit securely into the Holsters.
6. Tighten the screws on the Cane Brackets and Slide Brackets to 4.5 Newton
Meters.
7. Slide left and right Slide Caps closed, towards the shell.
Assembly and Mounting
Slide Bracket
Screws
Cane Bracket
Screws
Fig. 6