background image

VSD-1MC-20(40) 

Page 12 

Limited Warranty 

 
The manufactured equipment and supplied components have gone through 

rigorous inspection to assure optimal quality of product and reliability. Individual 

controls are factory tested under load, however the possibility of equipment 

failure and/or malfunction may still exist. 

 

For service, contact your local retailer or supplier. The warranty period shall be 

for two years from manufacturing date. Proof of purchase is required for warranty 

validation. 

 

In all cases, the warranty shall apply only to defects in workmanship and 

specifically exclude any damage caused by over-voltage, short circuit, misuse, 

acts of vandalism, lightning, fortuitous events, acts of God, flood, fire, hail or any 

other natural disaster. Any unauthorized work, modification or repair on this 

product automatically voids the warranty and disclaims the manufacturer from all 

responsibility. 

 

The manufacturer assumes only those obligations set forth herein, excluding all 

other warranties or obligations. This warranty stipulates that in all cases the 

manufacturer shall be liable only for the supply of replacement parts or goods 

and shall not be liable for any personal injury, damages, loss of profits, 

interrupted operations, fines for infringement of the law or damages to the 

production of the PURCHASER and the PURCHASER shall take up the defence 

and hold the manufacturer faultless regarding any legal or extra legal 

proceedings, notice, or claim by the customer or by a third party, and regarding 

any legal and extra legal expenses and fees brought forward on by such 

damages.

 

 

Summary of Contents for VSD-1MC-20














Reviews: