Varifan VPM-1, User Manual

Page: 6 / 16

Page 6
VPM-1
2.1 UNPACKING
Unpack the VPM-1 from its box and inspect contents for
damage. Should the contents appear to be damaged,
contact your local distributor for return material
procedures.
The package should contain the following standard
items:
•
1 VPM-1 control
•
1 cable fastener or fuse
•
1 user’s manual
2.2 MOUNTING
Mount the unit to the wall using the mounting holes
located on the flange of the control housing.
Once the VPM-1 is in place, use a screwdriver to
remove the four screws holding the faceplate to the
housing.
To limit the unit’s exposure to noxious gases install
To limit the VPM-1’s exposure to noxious gases,
install the unit in a hallway.
Make sure the VPM-1 is properly installed, that is,
side up with the cable entry holes facing down. DO
NOT DRILL ADDITONNAL HOLES INTO THE
ENCLOSURE.
The VPM-1 operates in a temperature range of 0°C
(32°F) to 50°C (122°F).
The enclosure is watertight, but not splash proof or
immersion proof. DO NOT CLEAN WITH HIGH
PRESSURED WATER. Cover it carefully with plastic
when cleaning the room.
Install in an area protected from sunlight.
It is prohibited to use overhead cables outside the
building.
www.monitrol.com