Page 9
Chapter 2 describes the installation of the MST-5 control.
2.1 UNPACKING
Unpack the MST-5 and inspect contents for damage.
Should the contents appear to be damaged, contact your
local distributor to return the material.
The package should contain the following standard items:
•
1 MST-5 control
•
1 installed temperature probe (model number 2004-1K)
•
1 User’s manual
The following optional items may be included:
•
3 additional temperature probes for temperature
averaging.
2.2 MOUNTING
The manufacturer recommends to closely observe the
following installation procedure, and that all work be
performed by a certified electrician. Failure to do so may
void the warranty!
CHAPTER 2 - INSTALLATION
To limit the unit’s exposure to noxious gases install the
unit in a hallway.
Make sure the unit is mounted right, side up with the
cable entry holes facing down.
The MST-5 will operate in a temperature range of 32°F to
120 °F (0 °C to 50 °C).
The enclosure is watertight, but it is not splash proof or
immersion proof. DO NOT WATER the control. Cover the
control carefully with plastic when you are cleaning the
room.
It is prohibited to use overhead cables outside the
building.
www.monitrol.com
Summary of Contents for MST-5
