Page 9
Chapter 2 describes the installation of the ECS-4+control.
2.1 UNPACKING
Unpack the ECS-4+ from its box and inspect contents for
damage. Should the contents appear to be damaged,
contact your local distributor to return the material.
The package should contain the following standard items:
•
1 ECS-4+ control
•
1 installed temperature probe (model number 2004-1K)
•
4 or 5 cable fasteners (4 stages and 1 line)
The following optional items may be included:
•
3 additional temperature probes for temperature
averaging,
•
1 SPS-1 static pressure probe. The ECS 4+ requires
the SPS-1 static pressure probe for maximum
accuracy in monitoring and control of pressure levels.
2.2 MOUNTING
The manufacturer recommends that the installation
instructions which follow be adhered to as closely as
possible, and all work be performed by a certified
electrician. Failure to do so may void the warranty!
To limit the unit’s exposure to noxious gases install the
unit in a hallway.
Make sure that the unit is mounted right side up with the
cable entry holes facing down.
The ECS-4+ will operate in a temperature range of 32°F -
120 °F (0 °C - 50 °C).
The enclosure is watertight, it is not splash proof or
immersion proof. DO NOT WATER the control. Cover the
control carefully with plastic when you are cleaning the
room.
It is prohibited to use overhead cables outside the
building.
CHAPTER 2 - INSTALLATION
www.monitrol.com