Page 36
ECS 1M
LOW TEMPERATURE ALARM
This function establishes the temperature
difference
below the main set point that the
room can reach before a low temperature alarm
is signalled. When a low temperature alarm
occurs an alarm contact is activated and the
alarm LED lights on the front panel.
The low temperature alarm is adjusted in 0.5
degree increments from a minimum setting of -
32.0°F (-18.0°C) to a maximum setting of 0.0°F
(0.0°C)
Adjusting the low temperature alarm
setting:
rotate the Selector dial to position (12),
rapidly rotate the Adjustor dial back and
forth to enter secondary function mode,
rotate the Selector dial to position (10),
rotate the Adjustor dial counterclockwise to
decrease the setting, clockwise to increase
it.
The low temperature alarm setting is displayed
on the ECS.
Alarm
www.monitrol.com