Page 22
ECS 1M
The 8 primary functions are:
1 Main set point temperature
2 Fan 1 differential temperature
3 Fan 1 minimum speed
4 Fan 1 duty cycle timer
9 Ramping
10 Record low temperature display
11 Record high temperature display
12 Ambient temperature display
Any one of these functions is selected by rotating the
Selector dial to the corresponding number and associated
graphical image printed on the faceplate of the panel.
When primary functions 1 through 4 and 9 through 11 are
selected, the LED status window displays a blinking value.
Function 12 displays ambient temperature.
The 8 secondary functions are:
1 Relative humidity setting
2 Fan 1 motor compatibility
3 Fan 1 minimum speed setting for humidity
4 Fan 1 maximum speed
9 Ramping minimum temperature limit
10 Low temperature alarm
11 High temperature alarm
12 Relative humidity display
Select any one of these secondary mode functions by:
rotating the Selector dial to (12)
rapidly rotating the Adjustor dial back and forth to enter
secondary mode.
rotating the Selector dial from function (12) to any other
function.
When secondary functions 1 through 4, and 9 through 11
are selected the status window displays a blinking value
along with a scrolling LED display. Selection of function 12
removes the ECS from the secondary function mode.
www.monitrol.com