VS Series Leak Detector Wireless Remote
DRAFT 11/2/06
2-11
2.2.5.1 Choose Leak Detector
The following appears on this screen (Figure 2-10):
❑
The number on the left (e.g.
8
) is the leak detector channel number.
❑
The string on the right (e.g.
11:3C:0C
) is the lower three byte portion of the leak
detector MAC address. The MAC information is used to identify potential host leak
detectors, or, if more than one leak detector is set to the same channel, selecting the
leak detector via MAC address.
Once the desired MAC channel is shown in the
Choose LD
screen, pressing
ENTER
causes
the wireless remote to attempt to establish a session with that leak detector. The leak
detector and wireless remote MAC addresses are viewed in the
MAC Address
screen (see
Section 2.2.5.3 “MAC Address Verification” on page 2-16).
Figure 2-10 Choose LD Screen
To choose from an existing list:
1. Press the
,
, + or - hard buttons to highlight the
Home
screen Tools icon
and press
Enter
and the
Speaker Volume
screen appears (Figure 2-11).
Figure 2-11 Speaker Volume Setup Screen
Summary of Contents for VS PR02x
