ProStar 220/230/240 SDM Control Manual
-
23 -
03-914947-21:4
Click on one of these buttons and the following screen appears:
The flow and/or the solvent composition values could be defined
or changed. Click on
OK
to validate.
Click on the
button and the same screen as above
will be displayed.
Click on the
button and the following screen will
appear:
Enter the new values of pressure limits. Outside these limits, the
pump stops and the alarm sounds. Click on
OK
to validate.
The progress bar displays the Run Time and the End Time of the
pump or the elapsed time when the pump is equilibrating.
Click on
to reboot the pump.
Click on
to display the last event and error that occurs in
the pump module.
Click on
or
to start or stop the pump.