ProStar 220/230/240 SDM Control Manual
-
21 -
03-914947-21:4
analysis, the number of lines (corresponding to the number
of samples) and the sequence name.
2. The sequence is displayed. Complete the sequence
information columns (refer to the Galaxie Chromatography
Data System user’s guide).
The fields like the
Method Name
, the
Run Name
, the
Run ID,
and the
Acquisition length
must be filled in before starting
the analysis. This information is automatically imported from
the acquisition part of the method if defined.
3. Start the sequence by clicking on the
button.
NOTE:
For more details about how to start an acquisition, refer to the Galaxie
Chromatography Data System User’s Guide.
Running Acquisition Status
Viewing a Running Acquisition
To view a running acquisition, click on the
Systems
tab then
select the running system. A window is activated which is
composed of two parts: the running chromatogram and the
status window where the driver modules are listed.
Status of the ProStar Pump
Click on the
button corresponding to the ProStar pump
driver, and the pump status screens will appear. It contains four
sub-sections:
Elution
,
Relays
,
About
and
Overview
. Click on the
required sub-section to display the corresponding parameters
that will be used during the chromatographic run.