Vari Hurricane F-600, Instructions For Use Manual, Page: 9 / 41

F-600
9
Figure 1: Mulcher Hurricane F-600
5 Instructions for use.
5.1 Machine assembly.
Ask your dealer to provide unpackaging of the machine and briefing in machine operation.
With respect to difficult withdrawal of the machine from the box, it is advised to cut
the box through in corners and then to take off the machine onto a fixed rest. Grip points:
front – blade cover edge, rear – tube of handlebars grip. Regarding the machine weight, work
with a minimum of one other person.
If you assemble the machine yourself, please follow the instruction below:
1. Remove all parts from the bag and the leading wheels from the machine.
2. The front lifting cover is mounted above the chassis deflector because of the packing
reason; to achieve correct functionality of the machine, it is necessary to dismount it
and mount it back under the chassis deflector, see fig. 2.
3. Unloose the tightening nut on the handlebars (see fig. 3, position 1) and put the
handlebars to the working position. Turn the handlebars anti-clockwise around the
vertical axis by 180°, so that the grips point backwards. Avoid contortion of the
bowden cables!
4. Hook the springs (1) into eyes in front cover arms and into holes in footings on the
blade cover with a suitable hook.
5. Screw the leading wheels on the footings in the front of the blade cover by means of
bolt (2), flat washer 10.5 mm (3) and self-locking nut M10 (4). When putting the
leading wheels frame into the lock-plate guiding, the locking pin must be pushed in
(by pressing the lever of cutting height adjustment on the right handlebar grip – see
fig. 1).
Accelerator lever
Cutting height adjustment lever
Engine starter grip
Blade cover
Front lifting cover
Leading wheels frame
Front grip point
Leading wheels
Travel wheels
with pin
differential
Wheel drive clutch lever
Handlebars
Tightening nut for
adjustment of
handlebars height
Lever of handlebars
side adjustment
Engine
Leading
wheels locking
Cutting height adjustment
Gear shifting lever
Blade drive lever