Vari Hurricane F-600, Instructions For Use Manual, Page: 17 / 41

F-600
17
Table of machine lubrication
* besides lubrication intervals in this table, lubricate the marked points after each water washing, especially when using power water
Figure 9: Other lubrication points
6.2 Tightening of bolted connections.
Regularly check the tightening of all important bolted connections. Always check the
tightening of bolts fastening the blade to the blade holder and blade holder to the shaft prior to
any machine use.

Replacing bolts, use only original spare parts supplied by the manufacturer!
Figure 10: Knife clamping detail
Machine lubrication
During
season
After
season
Lubricant Figure no.
All wires on the input to Bowdens cables and on
the output from adjustment bolts
min 2x * yes silicone oil in atomizer -
Wheel pin and fork on the suspension of leading
wheels
min 1x 8 hrs * yes grease, engine oil 7
Contact area of handlebars with the holder of
handlebars
min 2x * yes grease 3
Arresting pin of leading wheels min 1x 8 hrs * yes silicone oil in atomizer, grease 5
Pin of tension pulleys arm, gear-shifting lever on
the gearbox
min 2x yes grease, engine oil 9
Brake lever seating near the front belt pulley
(after disassembling the plastic cover of the belt)
min 2x yes engine oil 9
Travel wheel hubs min 2x * yes grease -
Bolt M10x20
Tightening torque 48 N.m
NORD LOCK washer 10
Bolt M10x20
Tightening torque 48 N.m
Bolt M10x20
Tightening torque 38 N.m