Vari BDR-595 E EuroAdela, Instructions For Use Manual, Page: 11 / 39

BDR-595 E EuroAdela
11
5. Put the apron with frame into the cut-out in the upper casing (13). Then put the casing
with the apron frame on the machine and bolt it with two nuts M8 (14) with large flat
washers Ø9mm (10). Provide the nuts with plastic caps (19). The apron frame will be
screwed to the machine under engine front with M6x20 bolts (20) with small flat washers
Ø6.4mm (3). Provide the heads of M6x20 bolts with plastic caps (7).
6. Then bolt the apron to the upper casing by means of bolts M6x16 (2) with large flat
washers Ø6.6mm (5) and self-locking nuts M6 (6). Provide the M6x16 bolt heads with
plastic caps (7).
7. Bolt the mud guards (17) to the upper casing (13) by means of bolts M6x16 (2), self-
locking nuts M6 (6) and large flat washers Ø6.6mm (5).
Apron around the
mowing disk
Figure 2a :
Apron assembly
4
7
2
5
3
6
1b
1a
2
3