background image

 

 

 

 

 

PREVENT FIRES 

Do not smoke or have open flames when operating or refilling the log splitter. Never 
operate the log splitter near a flame or candle. Oil is flammable and can explode. 
 

 

KEEP BYSTANDERS AWAY 

Allow only one person to load and operate the log splitter. Always keep bystanders, 
including  visitors,  children  and  pets  away  from  the  work  area,  especially  when  the 
log splitter is under operation. Only the operator should stand near the machine and 
only  within  the  safe  operating  area  prescribed  in  this  manual.  Never  use  another 
people to help you with freeing jammed log. No one under the age of 16 should be 
allowed  to  operate  the  log  splitter.  Any  individual  under  the  age  of  18  should  have 
the necessary training, skills to perform the functions properly and safely and should 
always be under the supervision of adult. 
 

 

INSPECT YOUR LOG 

Never  attempt  to  split  logs  containing  nails,  wire  or  debris.  Always  make  sure  that 
both ends of the log you are splitting are cut as square as possible. This will prevent 
the  log from  sliding  out  of  position  while  under  pressure.  Branches  must be  cut  off 
the trunk. 
 

 

DON’T OVERREACH 

Keep  proper  footing  and  balance  at  all  times.  Never  stand  on  log  splitter.  Serious 
injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted. 
Do  not  store  anything  above  or  near  the  log  splitter  where  anyone  might  stand  on 
the tool to reach it. 
 

 

AVOID INJURY FROM UNEXPECTED ACCIDENT 

Do  not  straddle  or  reach  across  the  splitting  area  when  operating  the  log  splitter. 
Never  pile  logs  to  be  split  in  a  manner  that  will  cause  you  to  reach  across  the  log 
splitter.  Only  use  your  hands  to  operate  the  control  levers.  Never  use  your  foot, 
knee,  a  rope  or  any  other  extension  device.  Always  pay  full  attention  to  the 
movement of the wedge ram. Never attempt to load your log splitter while the ram is 
in motion. Keep hands out of the way of all moving parts. Never try to split two logs 
on top of each other. One of them might fly up and hit you. 
 

 

PROTECT YOUR HANDS 

Keep your hands away from splits and cracks which open in the log. They may close 
suddenly and crush or amputate your hands. Do not remove jammed logs with your 
hands. 
 

 

DON’T FORCE TOOL 

It will do a better and safer job at its design rate. Don’t use log splitter for a purpose 
for  which  it  was  not  intended.  Do not alter  the  equipment,  or  use the  equipment  in 
such a way as to circumvent its design capabilities and capacities. Never try to split 
logs larger than those indicated in the specifications table. 
 

 

DISCONNECT POWER 

Unplug  when  not  in  use,  before  making  adjustments,  changing  parts,  cleaning  or 
working on the log splitter. Consult technical manual before servicing. 
 

Summary of Contents for 65710


























Reviews: