Vari 65710, Instructions For Use Manual

Page: 15 / 25

15
Turn the motor switch to the ON position to start the log splitter. To stop the machine,
just turn the motor switch to the OFF position.
Make sure the direction of motor
rotation is correct. Turn the motor
on; the wedge ram should rise to
the highest position automatically.
If the wedge ram is already at the
highest position when the motor
starts, grip both control levers and
lower them, the wedge ram should
start to move downward.
If no ram motion is detected after
the motor starts, power off the
motor immediately to change
motor polarity by turning the pole switching device inside the plug with a screwdriver.
400 V 3N
Never allow motor running at counter direction. This will damage
the pump and will void the warranty.
Splitting
1. Place the log vertically on the
support table, so that it lies flat on
its face. Press
the left lever to
lower
the
extended log
fixing claw
against the log
to secure it. The
extended
log
fixing claw can
be adjusted to fit
logs
with
different heights.