User Manual: UM50566-EN
Optica 30/40/50 series
Revision: 3.0
Date of release: 2019-01-09
17/36
www.vareximaging.com
3.2.
Status LED color
The status LED indicates the Collimator modes (Optica 30/40 Series only). The table below explains
the status LED indications.
During the POWER-ON self-test and normal OPERATING MODE, the collimator software can detect
fault conditions see §3.3
Collimator
Mode
Color of the
status LED
Explanation of the color indication
POWER ON
Green,
Flashing,
50% OFF
50% ON
No fault condition, the collimator is performing its power-ON self-
test.
OPERATING
MODE
Green
Collimator performs as expected.
ERROR
MODE
Red
or
Green,
flashing,
90% OFF
10% ON
A fault condition is detected. The collimator is not able to perform
as expected, see §3.3