Worn out torch parts
Turn off machine. Inspect and replace
consumables as necessary.
Consumables wear out
too quickly
Unit capability is exceeded
Pilot Arc time is excessive
Improper air supply
If the material is too thick you should increase
the torch angle to prevent blowback into the tip
of the torch
The maximum recommended time for pilot is 5
seconds.
Check air supply, operating pressure should be
~60psi
Check your air compressor
Limited
Limited
Limited
Limited Warranty:
Warranty:
Warranty:
Warranty:
This product is warranted to be free of manufactures defects for 1 year (parts and labor) from the
date of purchase. The warranty excludes consumables, normal wear and tear, misuse, lack of
maintenance, and improper installation. We will repair or replace the faulty component or unit at
our option. The purchaser is responsible for all shipping and handling charges both ways and should
expect a turnaround time of up to 4-6 weeks. If we decide that the unit must be replaced and an
identical unit is not available we reserve the right to replace with a similar unit. We make no
warranty of fitness for a particular purpose; it is sole the responsibility of the purchaser to determine
if this product is suitable for their intended use.
