VAPORETTO HANDY
9
ENGLISH
storing it, it is neccessary to press the steam
request lever (
4
) till the steam flow is exhausted.
CONNECTION OF ACCESSORIES
• To connect the extension tubes (
7
) to the grip,
the large brush (
8
) and the adapter (
5
), simply
join them to one another until the accessory
locking button (
11
) clicks into place (Fig. 6).
• To release the accessories simply hold the
button (
11
) down and separate the
components (Fig. 6).
• Before using the accessories, make sure that
they are firmly in place.
To connect the accessories (
6
) and (
12
) to
steam gun or to extension tubes, it is necessary
to fasten the adapter first (
5
). Once the adapter
is secured in place, block the accessory and
lock it by turning it in the direction of the arrow
on it (Fig.7).
SAFETY CAP / “WATER OUT”
Steam may cause serious injury if in
contact with body parts. Always allow
the steamer to cool down before hand-
ling.
This appliance is equipped with the safety cap,
which prevents opening of the boiler tank as long
as there is any pressure remaining inside. This is
an important and indispensable safety device,
and it is necessary to follow certain procedures
when re-filling the boiler tank.
Each time you wish to open the safety cap,
proceed as follows:
• Switch off the machine at the on/off switch (
B
).
• Disconnect the power supply cable (
F
) from the
electrical outlet
.
• Press the steam request lever (
4
) on the steam
gun (
2
) so as to fully exhaust the steam supply
from the boiler tank.
•
Wait at least for 5 minutes to allow the boiler
tank to cool down.
• Unscrew anti-clockwise the safety cap (
A
).
• When cool, proceed to carefully refill the boiler
tank as described in paragraph 1 of the section
“Preparation for Use”. If refilling the generator
when not completely cooled, we recommend
that you then CAREFULLY pour only very
small quantities of water at each pouring, so as
to avoid spitting from the boiler tank. Cover ex-
posed skin whilst filling.
TIPS FOR BETTER UNIT
PERFORMANCE
WARNINGS
• For cleaning leather, wood or delicate fabrics,
consult the surface manufacturers instructions.
Clean without accessories at a safe distance
together with a soft cloth and always do a test
on a non visible part of the item first or on a
sample. Allow the test area to dry completely
before observing results and effects on surface
or color before proceeding to clean further
areas, making sure that exactly the same
distance and technique are applied as for the
test area.
• For cleaning wood surfaces (furniture, doors
etc.) or brickwork floors take great care as a
too long application of the steam could alter
the waxed appearance, the shine or the color
of the surfaces cleaned. We therefore
recommend you to apply the steam on such
surfaces only for brief periods or to clean these
surfaces using a cloth first held in the steam.
• When cleaning glass surfaces in particularly
low temperatures preheat the glass holding the
hand gun at minimum 1.6 ft (50 cm) distance
from the surface to be cleaned.
• For the care of your plants vaporize at a
minimum distance of 1.6 ft (50 cm).
STEAM GUN (2)
The steam gun can be used directly, without
connecting the brushes, on all spots requiring a
stronger, closer treatment.
The more resistant the stain, the closer you
should hold the gun, the steam pressure and
temperature being higher at the source. You
should however always wipe with a dry cloth (or
a slightly abrasive sponge-if the spot is a difficult
one to remove) after using the gun.
The steam gun is particularly efficient at:
• breaking down rug and carpet stains before
they are treated with the large brush;
•
cleaning stainless steel surfaces, panes,
mirrors, enamelled surfaces;
VAPORETTO HANDY -NA- 4S09:FEV 1000-950.qxd
17/10/2012
11.23
Pagina 9
