FITTING INSTRUCTIONS
VAPALUX MANTLE Ref. V42.
INSTRUCTIONS FOR FITTING
Unscrew the Tubular Mantle Support “S” from the Burner
Body “B”. Pass the smaller end of support “S” through
the smaller opening in the Mantle and screw “S” into
position again. Stretch the larger opening of the Mantle
over the ridge on Burner Body “B” so that it rests in the
groove provided. Arrange the Mantle evenly and see
that it is not twisted. There is no need to burn the Mantle
off as the Mantle will automatically shape itself when
the lamp is lighted.
BS/2011/JPS/DW/EN
Place upper part of the mantle
16
Summary of Contents for 300X
