Press the DOWN button and highlight the Record
Setup option. Press the OK button to enter the
settings, and use the UP/DOWN buttons to navigate
the different options.
-
Resolution:
By default (DUAL CAM RECORDING
mode), both cameras record at 1920x1080P (30fps).
In SINGLE FRONT CAM RECORDING mode,
2560x1440P (30fps), 2304x1296P (30fps), 1920x1080P
(60fps), 1920x1080P (30fps) options are available.
-
Loop Recording:
This is set to 3minutes per video
clip. Press OK to change the duration: 1,3, 5, or OFF.
-
G-Sensor Set:
Set to Medium by default. Pressing OK
gives the following sensitivity options: High, Medium,
Low, Off.
-
Audio Recording:
Default is ON. Press OK and
DOWN button to toggle it OFF/ON.
-
Parking Monitor:
Default is OFF. Press DOWN
followed by OK to toggle it OFF/ON.
-
Front Camera Exposure:
Default is Default is 0.
Pressing OK gives the following options: 0, -1.0, -2.0,
+2.0, +1.0
-
Inside Camera Exposure:
Default is Default is 0.
Pressing OK gives the following options: 0, -1.0, -2.0,
+2.0, +1.0
-
Car Number Plate:
Press UP/DOWN and OK to set
your car license number.
-
Stamp:
Default is ON. Press OK to toggle it OFF/ON.
Stamp shows the date/time, logo, car number,
Speed and GPS Location information.
-
Rotate Display:
Default is OFF. Press OK and DOWN
button to toggle it OFF/ON.
-
Time Lapse:
Default is OFF. Press DOWN followed
by OK to set time interval: 1 Sec, 5 Sec, 10 Sec,
30Sec, 1Min, Off.
-
Power Off Delay:
Default setting is ON, forcing the
camera to automatically end recording and turn
off after you power down the car. Press OK and
DOWN button to toggle it OFF/ON.To finish setup,
press the MENU button to exit.
- 14 -
B. System Setup
-
Language:
Default is English. Press OK to select
between English, Simplified Chinese, German,
Japanese, Spanish, French, and Italian.
-
Format memory Card:
Press OK, navigate DOWN
and select OK to format the microSD card.
-
Time & Date:
Press UP/DOWN and OK button to set
the current date and time. Press the MENU button
to exit.
-
Auto LCD Off
: If you choose 3 Min, it will turn off the
camera screen 3 minutes after recording
commences. If you choose OFF, the screen will
always stay on. Press the OK button to select the
duration in minutes: 1, 3, 5, or OFF to disable it.
-
Device Sound
: Default is ON. Press the OK button
to toggle it ON/OFF.
-
Non-use Auto Power OFF
: A default setting of 3 MIN
means the camera is ON but not in use, it will auto
turn OFF after 3 minutes of inactivity. Press OK to
choose between 1, 2 minutes or 3 minutes, or OFF
to disable this feature.
-
Flicker Frequency
: Press OK to toggle between
50Hz/60Hz.
-
System Info
: Press OK to check the current firmware
version. (System Info)
-
Default Setting:
Press OK and select OK to reset the
device back to stock factory settings.Press the MENU
button to exit and complete the setup.